D SERIES METALLIZED POLYESTER CAPACITORS

 PARAMETRIC TREND CURVES AND ACCEPTANCE CRITERIA  

CAPACITANCE

Reference MIL-STD-202, Method 305

Test Frequency: 1000 Hz

Temperature: +25C

Capacitance Change Over Temperature.

Acceptance Limits:

@ -55C = -7% Maximum Change

@ +85C = +5% Maximum Change

@ +125C = 16% Maximum Change

 

DISSIPATION FACTOR

Reference MIL-STD-202,

Method 306

Test Frequency: 1000 Hz

Temperature: +25C

Acceptance Limit: 0.65% Maximum

  

INSULATION RESISTANCE

Reference MIL-STD-202, Method 302

Electrification shall be at rated voltage

or 500 VDC, whichever is less and for

a time not greater than 2 minutes.

Acceptance Limits

Test

Megs x f

Megohms

Temperature

Minimum

Need not exceed

@ +25C

10,000

30,000

@ +85C

100

1,000

@ +125C

10

100

 

VOLTAGE RATING

100% of listed voltage rating from -55C to +85C,

derate linearly to 50% of the listed voltage rating at +125C.

 VOLTAGE TEST

Reference MIL-STD-202, Method 301. Surge current is limited to 1 ampere maximum. Voltage applied for 1 minute (maximum) @ +25C. Ground test is performed terminal to case (where the case is not a terminal) at 200% of the DC voltage rating. Dielectric strength test is performed terminal to terminal at 150% of the DC voltage rating.

Metallized Polyester Specs

Metallized Polyester Index

American Home Page

Updated: July 30, 1997

Publisher: American Capacitor Corporation
American URL:
http://www.AmericanCapacitor.Com
E-mail:
Sales@AmericanCapacitor.Com

Copyright © 1997 American Capacitor Corporation. All rights reserved.

foamposites black suede foamposites for sale retro jordans for sale jordan 6 history of jordan history of jordan 6s foamposites jordan 3 sport blue jordan 6 history of jordan new jordans 2014