Z
SERIES SuperMetallized POLYPULSE CAPACITORSPARAMETRIC TREND CURVES AND ACCEPTANCE CRITERIA
CAPACITANCE
Reference MIL-STD-202, Method 305
Test Frequency: 1000 Hz
Temperature: +25°C
Capacitance Change Over Temperature.
Acceptance Limits:
@ -55°C = -2% Maximum Change
@ +85°C = ±1% Maximum Change
@ +125°C = ±2% Maximum Change
DISSIPATION FACTOR
Reference MIL-STD-202,
Method 306
Test Frequency: 100,000 Hz
Temperature: +25°C
Acceptance Limit: 2.0% Maximum < 5.0µf
INSULATION RESISTANCE
Reference MIL-STD-202, Method 302
Electrification shall be 100 VDC, for
a time not greater than 2 minutes.
Acceptance Limits:
|
Test |
Megs x µf |
Megohms |
|
Temperature |
Minimum |
Need not exceed |
|
@ +25°C |
100,000 |
200,000 |
|
@ +85°C |
1,000 |
20,000 |
|
@ +125°C |
100 |
2,000 |
VOLTAGE RATING
100% of listed voltage rating from -55°C to +125°C.
VOLTAGE TEST
Reference MIL-STD-202, Method 301. Surge current is limited to 1 ampere maximum. Voltage applied for 1 minute (maximum) @ +25°C. Ground test is performed terminal to case (where the case is not a terminal) at 200% of the DC voltage rating. Dielectric strength test is performed terminal to terminal at 150% of the DC voltage rating.
SuperMetallized PolyPulse Specs
SuperMetallized PolyPulse ZW3 Size Chart
Updated: July 30, 1997
Publisher: American Capacitor CorporationCopyright © 1997 American Capacitor Corporation. All rights reserved.